Beko 42WP300PS, Руководство по эксплуатации

Страница: 17 / 38

Manual tuning and storing of the
television channels:
If you already know the Channel number:
(Press ( ) button. Move onto the settings
menu by pressing the right movement
button. You may directly access this menu
by pressing the Blue button
( )
.
When you select the installation tab by
pressing the buttons
( )/( ) and press
the button ( ), a setup menu will be
seen on the screen. Select the program
in which you would like to perform an
Installation using the right-left direction
( )/( ) or numerical buttons. Select the
system in which you would like to make
the search from among the system tabs.
Enter the System tab by pressing the
movement button
( ) below. Move from
here to the band tab via the downward
movement button
( ). Pressing the right-
left movement buttons ( )/( ) on your
remote control, select the “S” for cable
channels and “C” for broadcasts received
via the aerial.
Select the Channel tab pressing the upward
movement button ( ) and using the numerical
keys or using the right-left movement keys
( )/( ), type in the channel number. If the
broadcast viewed on the screen is of your desired
quality, select firstly the initial storing tab via the
downward movement
( ) button to store in the
memory the process you have made.
Then press the ( ) button, the text 'stored' will
briefly appear on the screen. The broadcast will
be stored in the memory under the program
number you have selected. The program will be
stored with its number. You can tune and store
the other channels in the memory in the same
way. In the event that you wish to exit the
installation menu for any reason, simply press
the ( )
button.
-18-