background image

EN

10

after laying it on the floor level or 

close to the ground (less than 

40 cm above the ground), water 

discharge becomes more difficult 

and the laundry may come out wet. 

Therefore, the heights described in 

the figure should be followed.

•  To prevent dirty water refilling the 

machine, and to allow for easy 

discharge, the end of the hose must 

not be submerged in the drain water. 

The end of the hose must be able 

to take in air. The hose should be 

pushed into the drainage for more 

than 15 cm. If it is too long you may 

have it shortened.

•  The end of the hose should not be 

bent, it should not be stepped on 

and it must not be folded between 

the drain and the machine.

•  The length of the hose is too short, 

you may add an extension hose to 

the original section. The length of the 

hose must not be longer than 3.2 

m after coming out of the machine. 

To avoid water leakage failures, the 

connection between the extension 

hose and the drain hose of the 

product must be fitted well with an 

appropriate clamp as not to come 

off and leak. 

Electrical connection 

Connect the machine to an earthed 

outlet protected by a fuse of suitable 

capacity.

Important:

•  Connection should comply with 

national regulations.

•  Power cord plug must be within easy 

reach after installation.

•  The voltage and the allowed fuse 

protection are specified in the 

section “Technical Specifications”.

•  The specified voltage must be equal 

to your mains voltage.

•  Connection via extension cords or 

multi-plugs should not be made.

B

  A damaged power cable must be 

replaced by a qualified electrician.

B

  The appliance must not be operated 

unless it is repaired! There is the risk 

of electric shock!

Destroying the packaging 

material

Packaging material can be dangerous to 

children. Keep the packaging materials 

out of reach of children or dispose 

them by classifying according to 

waste directives. Do not dispose them 

together with normal domestic waste.

Packaging materials of your machine are 

manufactured from recyclable materials.

Disposing of the old machine

Dispose of your old appliance in an 

environmental friendly manner.

•  You may refer to your local agent or 

solid waste collection center in your 

municipality to learn how to dispose 

of your machine.  

Before disposing of your old washing 

machine, cut off the mains plug and 

make the door lock unusable.

Содержание 2012 CXY
































Отзывы: