Bekey SmartLock, Руководство по установке и инструкция пользователя

Страница: 16 / 20

16 SmartLock
8. Battery replacement
To replace the batteries, unscrew the SmartLock using the 2 mm hex
key(section 6.13). Hold the SmartLock while you unscrew it, so as not
to drop it on the floor and risk damaging it. Take out the battery
cover (see section 6.1) and insert 4 new AA batteries. Make sure that
the batteries are positioned correctly. Put the battery cover back on.
Place the SmartLock back onto the door, making sure that the
tailpiece is inserted into the tailpiece adaptor, and then tighten the
screw at the bottom of the SmartLock (see section 6.11 to 6.13).
Compatible battery types
Only use high-quality AA alkaline batteries for the BEKEY SmartLock.
Do NOT use rechargeable batteries as these may damage the unit.
Disposal/ recycling of batteries
Do not dispose of the batteries with normal household waste. Many
batteries contain toxic chemicals and heavy metals, which can easily
contaminate drinking water if they are allowed to break down in the
natural environment.
AA batteries may be recycled via special recycling stations. Keep your
used batteries dry and out of the reach of children until you have
enough for a trip to the recycling station.
For safety’s sake, tape over the ends of the batteries (+ and – poles)
to prevent them from leaking battery acid.
9. Troubleshooting
10. Warranty
Solving a problem with door opening
Cell phone
Step 1: Check that the app is searching for doors.
Step 2: Hold the phone closer to the door.
Step 3: Check that Bluetooth® is activated.
BEKEY SmartLock
When the batteries in the BEKEY SmartLock run low, the LED indi-
cator on the side will begin flashing red. You will then have a limited
number of door opening procedures remaining, before the unit runs
out of power.
We recommend that you replace the batteries as soon as the red
light begins flashing.
This BEKEY product comes with a three-year manufacturer’s warranty
(from the original date of purchase). Proof of purchase must be
presented before the warranty can be honoured.
The warranty only covers material defects and errors in the
manufacturing of this product. The warranty does not cover errors or
defects in the product caused by incorrect use, misuse, damp, heat, hu-
man error, faulty installation, excessive handling and any other factors
referred to in the sections 1.2, 6 and 7 of this manual.