Bekamak BMSY 360 CDGH, Руководство пользователя

Страница: 14 / 32

INSTRUCTIONS FOR MAINTENANCE
DAILY MAINTENANCE
1-REMOVE THE CHIPS ON WHEEL
2-CLEAN THE HYDRAULIC DRAWER
3-REMOVE THECHIPS AT SHAFT AND FLAT
4.MANOMETER SHOULD BE BETWEEN 190-210 BAR.
5-CLEAN THE TENSIONING SLIDE FLATS.
6. CLEAN THE CHIPS IN THE BORON OIL TANK
PUMP AIR TO REMOVE THE DIRTH IN HOSES
A-CHECK THE CHIP BRUSH.
B-FILL GREASE OIL FROM THE HOLE ON THE TENTIONING SHAFT.
C- CHECK THE TIGHTNESS OF WHEEL BOLTS.
D.CONTROL THE OIL LEVEL IN HYDRAULIC TANK
E. FILL GREASE OIL FROM THE HOLE ON THE TENSIONING SLIDE
BLADE GUIDANCE
FOR AN ACCURATE GUIDACE OF THE BANDSAW BLADE THERE ARE TWO
RIGID AND PRECISE VERTICAL GUIDE ARMS FITTED WITH ROLLERS FOR
TWISTING PRETWISTING AND CARBIDE INSERTED PLATES FOR THE FIANL
AND EXACT BLADE GUIDE. PUT THE BLADE ARMS ALWAYS AS CLOSE AS
POSSIBLE TO THE MATERIAL TO BE CUT AND TIGHTTEN THEM.
THE PLAY OF THE BLADE CAN BE RE-SET BY ALTERING THE POSITION OF A
CARBIDE INSERTED GUIDE PLATE.
THE MINIMUM PLAY SHOULD BE 0.04 MM.