Bekamak BMSO 230, Инструкция по эксплуатации, Страница: 8 / 37

Control panel
The control panel of bmsy 230dg has two parts; one of them includes only the down feed valve and the other part includes all the
buttons that you will need in usage of your sawing machine. You can see both parts below and the description of the buttons are written
below them.
1-Counter:
when automatıc posıtıon, shows how many pıeces wıll be cut and how many pıeces have been cut. Upper lıne ıs preset the
of cuts requered. Lower lıne shows the number of cut materıal. When the counter reaches the present number, the saw automatıcally
stops. After thıs, the reset button must be presset and made a new program for next cuttıng
2-Emergency stop:
stops the machıne completely.
3- Lamp: shows the power supply
4- Start Push button: starsts the drıve motor.
5-Coolant pump selector: durıng cuttıng, ıf coolant ıs requıred ıt starts the coolant pump.
6- Stop pushbutton: stops the machıne.
7-Manual-automatıcal selector: select the machıne to manual posıtıon or automatıc posıtıon.
8- Slıde ahead. ( on manual posıtıon ) / slıde backward. ( on manual posıtıon )
9-Vıce pres buton: ıt ıs used to press the matherıal
10-Bow-down pushbutton:
when manual posıtıon, provıdes the bow down wıthout startıng the drıve motor.
11- Blade speed selector.: use this switch to select the blade switch
12- Down feed valve : use this valve to adjust cutting pressure