BEKA BA384E, Руководство пользователя

Страница: 17 / 68

17
5.3 EMC
The BA384G complies with the requirements of the
European EMC Directive 2014/30/EU. For specified
immunity all wiring should be in screened twisted
pairs, with the screens earthed at one point in the
safe area.
5.4 Units of measurement and tag marking
on scale card.
The Rate Totaliser's units of measurement and tag
information are shown on a scale card which slides
into the instrument.
New Rate Totalisers are supplied with a printed
scale card showing the requested units of
measurement and tag information. If this information
is not supplied when the instrument is ordered, a
blank scale card will be fitted which can easily be
marked on-site with a dry transfer or a permanent
marker. Custom printed scale cards are available
from BEKA associates as an accessory.
To remove the scale card from a Rate Totaliser
carefully pull the transparent tab at the rear of the
instrument assembly away from the assembly as
shown in Fig 8a.
Fig 8a Removing scale card
To replace the scale card carefully insert it into the
slot on the right hand side of the input terminals as
shown in Fig 8b. Force should be applied evenly to
both sides of the scale card to prevent it twisting.
The card should be inserted until about 2mm of the
transparent tab remains protruding.
Fig 8b Inserting scale card into the
instrument assembly.