BEKA BA334NG Скачать руководство пользователя страница 23

Страница: 23 / 46

6.18 Local reset:

LoC CLr

The Local reset function contains two sub-functions

Clr tot

and

Clr gtot

which when enabled allow the

total display and grand total to be reset to zero via
the instrument push buttons while the Rate Totaliser
is in the totalisation mode.

6.19 Local total reset:

Clr tot

is a sub-menu in the

LoC clr

function which

when activated allows an operator to reset the total
display to zero while in the totalisation mode by
operating the

and

push buttons

simultaneously for more than three seconds.

Select

loc clr

in the configuration menu and press

(

which will reveal the

clr tot

prompt then

operate

(

again which will show

if the local total

reset is

oFF

. If set as required operate the

)

button twice to return to the configuration menu, or
the

button to change the setting followed

by the

)

button twice to enter the change and

return to the

loc clr

prompt in the configuration

menu.

Note:

The total display may also be reset to zero remotely
by connecting terminals RS1 and RS2 together for
more than one second. See sections 3.7 and 4.3 of
this manual.

6.20 Local grand total reset:

clr gtot

The grand total is a separate sixteen digit counter
which  is  incremented  in  parallel  with  the  total
display, but is not zeroed when the total display is
reset to zero.  The grand total may be viewed in the
totalisation  mode  in  two  eight  digit  sections  as
described in section 2.2 of this manual.

Clr gtot

is a sub-menu in the

loc clr

function

which when activated allows the operator to reset
the grand total display to zero in the totalisation
mode by operating the

)

and

push buttons

simultaneously for more than ten seconds.

Select

loc clr

in the configuration menu and press

(

which will reveal

clr tot

. Using the



button to select

clr gtot

and press

(

which will

show

if local grand total reset is

oFF

. If set as

required operate the

)

button twice to return to the

configuration menu, or the



button to

change the setting followed by the

)

button twice

to enter the change and return to the

LoC .clr

prompt in the configuration menu.

6.21 Grand total reset from configuration
menu:

Clr Gtot

The grand total is a separate sixteen digit counter
which is incremented in parallel with the total
display, but is not zeroed when the total display is
reset to zero. The grand total may be viewed in
the totalisation mode in two eight digit sections as
described in section 2.2 of this manual.

The grand total can be reset to zero from within the
configuration menu using this

CLr. Gtot

function, or

from the totalisation mode if sub-function

clr gtot

in the

loc clr

function is activated - see 6.20.

To zero the grand total from within the
configuration menu select

CLr Gtot

and press

(

which will cause the instrument to display

Clr . no

with

flashing. Press the

push

button until

Clr . YE5

is displayed and then press

(

which will result in a

0000

prompt being

displayed with the first digit flashing. This is a
request for the instruction to be confirmed by
entering

5urE

using the

buttons and the

(

button to move control to the next digit.

Pressing

)

will then reset the grand total to zero

and return the Rate Totaliser to the configuration
menu.

Note:

Once reset, the grand total can not be
recovered.

6.22 Security code:

CodE

Access to the instrument configuration menu may
be protected by a four digit security code which
must be entered to gain access. New instruments
are configured with the default security code

0000

which allows unrestricted access to all
configuration functions.

To enter a new security code select

CodE

from the

configuration menu and press

(

which will cause

the Rate Totaliser to display

0000

with one digit

flashing. The flashing digit may be adjusted using
the