BEKA BA334D, Руководство пользователя

Страница: 26 / 43

26
Fig 13 Alarm menu structure
9.2.4 Alarm enable: ‘EnbL’
This function allows the alarm to be enabled or
disabled without altering any of the alarm
parameters. To check or change the function
select 'EnbL' from the alarm menu and press P
which will reveal the current setting. The
function can be changed by pressing the Up or
Down button followed by the E button to return
to the alarm menu.
Note: The alarms will be automatically
disabled after the rate or total displays have
been recalibrated, or the alarm type has been
changed. Both alarms must therefore be
enabled after calibration changes.
9.2.5 Type of alarm: ‘tYPE’
Alarm 1 and Alarm 2 may both be rate or total
alarms, or one may be conditioned for rate and
the other for total.
To check or change the type of alarm, select
'tYPE' from the alarm menu and press P which
will reveal the current setting. The function can
be changed by pressing the Up or Down button
followed by the E button to return to the alarm
menu.
Note: When ‘tYPE’ is changed, the alarm
parameters are automatically set to the default
values and the alarm is disabled. It must
therefore be reprogrammed before use.