Installation
Operating manual
KINET
V1.4 E
Page 13 of 40
6.3 First start-up
WARNING
The equipment is to be used exclusively in accordance with the
accompanying documents.
Only when these conditions are met, the manufacturer considers
himself responsible for the impact on the safety, the reliability
and the function of the device.
In the event of a new connection of an
KINET
tilting bath tub,
the technical data must be observed.
WARNING
To prevent scalding, the hot/cold water mixer must be set up in
accordance with the local water supply prior to the first use.
Please consult the attached user manual to this effect.
The settings must be documented.
NOTE
In order to ensure a safe functioning and operation, we
recommend a regular maintenance and set-up of the
thermostatic mixer. These maintenance works are to be carried
out by a qualified technician.
Due to the relocation of the
KINET
tilting bath tub to another
room either changes to the local water supply, a readjustment
of the thermostatic mixer could be required.
Please refer to the attached user manual for the setting.
Содержание 910150700
