beixo Compact Скачать руководство пользователя страница 14

14

Warranty

Article 1 Warranty

1.1 beixo / Urban Bike Concepts b.v., 

hereafter beixo, guarantees that their 

bicycles are free of construction and/

or material defects and any other points 

which are covered within these warranty 

conditions. 

1.2 The warranty can only be claimed by 

the first owner. 

1.3 The warranty expires in accordance 

with the articles 3 and 5.

1.4 The warranty cannot be transferred to 

a third party.

1.5 The by beixo granted warranty con-

ditions in no way limit the ability of the 

purchaser to address the vendor under 

normal legal conditions as defined by 

local civil law.

Article 2 Warranty Period 

2.1 On all beixo bicycle frames a warranty 

of three (3) years is given for construction 

and/or material defects. On the shaft 

drive system we provide a two (2) year 

warranty period.

2.2 Their will be no warranty extended 

on normal wear and tear parts such as 

tires, gears, cables and brake pads except 

where construction and/or material de-

fects have been identified.

Article 3 Warranty Exclusions

3.1 In the following cases warranty will 

be lost.

a) Improper and/or unjust use of the bicy-

cle according to the designed purpose.

b) The bicycle has not been maintained 

in accordance with user manual instruc-

tions.

c) Technical repairs have not been carried 

out in a professional manner.

d) The fitting of aftermarket parts which 

do not meet technical specifications or 

have been incorrectly fitted.

e) Proof of purchase is missing or has not 

been signed by the vendor.

f) The warranty card has not been, or 

improperly filled-out or sent within the 

given time frame. 

3.2 Further responsibility is irrefutably 

denied by beixo for damage to the bicycle 

or parts thereof as a result of:

a) Defective adjustment of handle- bars, 

handlebar rod, saddle, saddle rod, gear 

change mechanism, brakes, quick-release 

mechanism of wheels and saddle;

b) The untimely replacement of parts 

such as brake and gear change mecha-

nism cables, brakes, tyres, and cogs; 

c) Climatological influences such as nor-

mal discoloring of paint.

Article 4 Warranty-parts

4.1 During the warranty period all parts 

which have been identified by beixo as 

suffering from construction and/or mate-

rial defects, will be repaired or

reimbursed by choice of beixo. The 

eventual costs of (de-) assembly are to be 

borne by the owner.

4.2 Cost of transport of the bicycle and/

or parts thereof to and from beixo will be 

borne by beixo if the parts in question are 

subject to warranty.

4.3 Should the part in question for war-

ranty no longer be in stock or deliverable, 

beixo    will arrange for at least an equally 

valuable alternative part.

Article 5 Claiming Warranty

5.1 Claims under this warranty need to be 

presented with the bicycle or the related

part thereof for inspection by a beixo 

approved specialist together with proof 

of purchase.

Содержание Compact

















Отзывы: