Beisler 100/68, Руководство по эксплуатации

Страница: 119 / 162

Testing inputs/ outputs
Inputs Outputs
ATTENTION !
The input elements have been carefully set by the manufacturer.
Settings and corrections must only be done by trained service
personnel.
Caution: Risk of injury !
Do not reach into the running machine during the function test.
Testing input elements
–
Change between the basic module (inputs S1 to S104) and the
CAN node (inputs SC101 to SC116) with the key “CAN”.
–
Tap the key “S?”.
The “numeric pad” is opened.
–
Enter the code number of the desired input element (see tables).
–
Tap the key “OK”.
–
Actuate the input element and check the switching state at the
display.
In the field 1 the designation and the switching state (+/-) of the
actuated input is displayed.
–
Tap the function key “ ESC ” to quit the menu.
NOTE !
It is also possible to test several inputs one after the other.
29
4
1