Belonging to
CONFORMITY
Installation and user
guide
Important: Assembly / maintenance of the appliance must be carried out by qualified personnel and in
accordance with applicable laws and regulations.
The manufacturer assumes no responsibility for the use of products that have to comply with particular
environmental and / or installation standards.
Important note
Before connecting the equipment, it is recommended that you read the instruction manual carefully and
keep it for future reference. It is also recommended to perform the electrical connections correctly as
per enclosed drawings, observing the instructions and the Standards.
N.B. Refer to the documentation in all cases where the symbol is on the side
EN 50194
EN 50270
Compliant EN 60079-29-1
Installation EN 60079-29-2
Reports issued by TUV Italia
Channel: Beinat gas solutions
Electric connections also available on
Conventional Gas Sensor SG500
V. 3
The SG500is born from the elegance and prestige that has always distinguished BEINAT S.r.l. and from the
home fitness concept.
The probe is a Catalytic gas detection unit with IP30 protection that, together with one of BEINAT’s industrial
type Control Units, detects the presence of esplosive gas such as Methane, LPG.
The sensor provides a signal of alarm to the control unit to which it is connected with a sensitivity of intervention
calibrated within 20% of the LEL.
The degree of protection that is provided allows the useeven in critical conditions of moisture, dusty
environments and where the norms require, making it ideal for its use in industrial environments.
The probe has a linear output 0 to 20% LEL, working with the standard 4 to 20 mA.
