Beijing BJA5500, Руководство пользователя

Страница: 4 / 6

4
(the best working effect is keeping 30mm to 50mm of water above ceramic disc,If water is too
deep, it can not spray mist, but if water is too shallow, it will stop to spray mist automatically,also
when the water –lever sensor switch is out of water. It will also stop to work)
Pls notice that there are no obstacles within the scope of more than 100mm space of the sprayer
ceramic water level.
2.The Spray indicator light will be bright after connecting the mist maker with power supply,then
the ultrasonic atomizer will work.
If the spray lights flash and the atomizer don’t work, this mean that there was not enough water.
3. As the mist maker normally working, the water in the container will constantly evaporate,when
the water is below the water level sensor,it will automatically be protected and stop misting,at this
time the spray lights will flash. After adding the water above the water level sensor,it continues
misting.
4.At the beginning of the work, the atomization quantity may be small,it will be stable misting and
become large after working sometime.When the winter is coming,the weather will affect the
misting rate,you can put some hot water to speed its stable misting rate.
5.When you don’t use the mist maker for a long time,please make sure pull the transformer/adapter
input lead wires out,which can avoid the accident/ unfortunate happening.
四
:Matters Needing Attention,Services and Maintenance
1.Pls operate them accotding to our instructions. Check the input voltage of transformer(generator)
if it’s suitable your local voltage standard before using.
2.When the mist maker normally work,inevitable meeting produces certain heat caused by
temperature rise,at this time,we need to pour enough water in the container to heat eliminate.
Generally the volume of water should be greater than 30 litres(in order to ensure the mist maker
normally working,it should be enough water in the container,so pls make sure more than 30 litres
water in the container).
The bottom of mist maker can’t be less than 100mm high away from the container, or can’t be less
than 15 litres water in the container.This can improve the heat dissipation capacity,If the water
under the floating status or well elimination condition,the water will be reduced.
3.Please don’t be covered by sundries above the mist maker,and hold more than 100mm space of
the sprayer,also can’t put the atomizer in the sealed container.
4.Please don’t let the mist maker work under the high temperature water,when the temperature