5
1.Use the ceramic disc key to wring out the copper ring with anticlockwise direction,and take it
out,please see clearly the ceramic disc face and bottom side.
2.Put the new ceramic disc on the original place(Please take attention to the installation direction
accorded with the same as original one.)
3.Put the copper ring,and use the ceramic disc key to screw down with the clockwise direction.
4.Please put the mist maker in the water container again,it can normally work as before.
How to replace the piezoceramics.
1) With screwdriver through the two holes. Reverse open the top black part as the picture.
2) take down the pressure ring,and take out the old piezoceramics.
