23
imports through the ID
card or transmits through an upper computer any calibration
curves, the analyzer will save the curves automatically. The analyzer can save the calibration
data for a maximum of 16 items with each item having 3 batches simultaneously. The testing
results during normal operation by users will be saved automatically in the analyzer in the
record form. The analyzer can save a maximum of 50,000 records. The data saved can resume
automatically after power-off without losses. When users select “Factory Reset”, the recorded
data will be cleared.
6.3.7 Those using and operating the supporting PC software for the fluorescent
immunoassay analyzer need to have relevant knowledge: be familiar with such
operating systems like windows XP, windows7 and with the installation, unloading of
the software installation package in windows XP, windows7.
Chapter VII. Troubleshooting Guide
Steps dealing with device crash
When there is no response to clicking the analyzer interface buttons or analyzer
press keys, device crash occurs. Please restart the analyzer by following the steps
below:
1) Switch off the power;
2) Plug and unplug the power cord again;
3) Switch on the power.
Notes to common errors:
1. Unable to perform the “testing” function of analyzer may result from the user
interface error. This will not influence the data backup and transmission function. In
this situation, you can upload the records backed up to the upper computer software
and then return the analyzer to the factory for repairing.
2. The device self application programs error. The possibility for this error is very low.
When it occurs, the testing data will lose. However, the historic data backed up in the
analyzer will not lose. At this point, power off the analyzer and restart the device to
use continually.
