16
17
CHAPTER 4 Take a measurement
4.1 Preparation
Before measuring, you connect the sensor. Please connect sensors
slightly.
Understanding the screen.
Fig.4.1
Note: In the red circle, In the red circle, there are the high and low limit
of the parameter.
Date and time
In the main screen, rotate the konb on the date and time, press the
knob enter into the time setting screen.
Under the time setting screen, rotate the konb on the time setup to
adjust the date and time.
Rotate the knob on the delete that on the bottom of the screen, press
the knob to delete data.
Please take caution to the deletion of data; you will never get the data
back once deleted.
Reset to factory default
Note: All the setting will be reset to factory defaults. Please be careful.
Fig.3.14
Demo
Rotate the konb on the demo, press the knob enter into the demo screen.
Under the demo interface
，
press the knob return to the menu screen.
Fig.3.15
