Booting
2
Booting
2.1 Welcome screen
1. Apply power to the operator panel.
2. Within 20–30 seconds, the
welcome screen
will appear.
The following items about the operator panel are listed:
•
Size of external memory card, if applicable
•
IP address
•
Panel image version
If a project has been downloaded to the panel, it will be loaded automatically.
If there is no project in the panel, touching the screen will display the service menu.
If there is an SD card inserted into the panel, and the project on the SD card differs
from what is saved in the operator panel, then the user is asked if the project and
IP-settings should be restored.
The welcome screen for a X2 control 10 panel
Position
Description
1
Panel type.
2
External Memory card status.
3
Network status. An attached network cable is indicated with an
asterisk.
4
Panel image main version and build number.
Beijer Electronics, MAEN205G
8
