Behringer XENYX 1204 Скачать руководство пользователя страница 8

Страница: 8 / 16

XENYX 1204FX/1204 User Manual

Stereo aux return connectors

2.3.3

STEREO AUX RETURN 1

The

STEREO AUX RETURN 1

connectors

generally serve as the return path for the
effects mix generated using the post-fader aux
send. This is where you connect the output
signal of the external effects device. If only
the left connector is used, the AUX RETURN
automatically operates in mono.

You can also use these connectors as

◊

additional line inputs.

STEREO AUX RETURN 2

The

STEREO AUX RETURN 2

connectors serve as the return path for the effects

mix generated using the FX control. If these connectors already function as
additional inputs, you can route the effects signal back into the console via a
different channel, with the added benefit that the channel EQ can be used to
adjust the frequency response of the effects return signal.

In this instance, the FX control of the channel being used as an effects

◊

return should be turned fully counterclockwise, otherwise feedback
problems could occur!

If you wish to use the internal effects processor, no connectors should be

◊

plugged into STEREO AUX RETURN 2.

Stereo aux return

2.3.4

STEREO AUX RETURN 1

is a stereo control which

determines the level of the signal in the main
mix. If STEREO AUX RETURN 1 is used as effects
return, you can add the effects signal to any “dry”
channel signal.

In this instance, the effects device should

◊

be set at 100% effect.

STEREO AUX RETURN MON

The

STEREO AUX RETURN MON

control has a special function: it can be used to

add an effect to a monitor mix. For example:

Monitor mix with effect

In this instance, the effects device should be set up as follows: AUX SEND 2 is
connected to the L/Mono input of your effects device, while its outputs are
connected to STEREO AUX RETURN 1. Connect the amplifier of your monitor system
to AUX SEND 1. The AUX SEND 1 master control determines the volume of the
monitor mix.

You can now use the STEREO AUX RETURN MON control to adjust the level of the
effects signal routed to the monitor mix.

You can easily use the headphones distribution amplifier BEHRINGER POWERPLAY
PRO HA4600/HA4700/HA8000 to provide you with four (or eight with the HA8000)
stereo headphone mixes for your studio.

STEREO AUX RETURN 2 (FX)

The STEREO AUX RETURN 2 control determines the level of signals fed into the
AUX RETURN 2 connectors which are routed to the main mix.

Fig. 2.8: Stereo aux return
connectors

Fig. 2.9: Stereo aux return controls

MAIN MIX/ALT 3-4

The MAIN MIX/ALT 3-4 switch routes the signal connected to STEREO AUX RETURN 2
to either main mix (not pressed) or submix (Alt 3-4, pressed).

Tape input / tape output

2.3.5

CD/TAPE INPUT

The

CD/TAPE INPUT

RCA connectors are provided

for connecting a 2 track machine (e.g. DAT
recorder). They can also be used as stereo line input.
Alternatively, the output signal of a second XENYX
or BEHRINGER ULTRALINK PRO MX882 can also be
connected. If you connect a hi-fi amplifier with a
source selection switch to the CD/TAPE INPUT, you can
easily switch between additional sources (e.g. cassette recorder, CD player, etc.).

CD/TAPE OUTPUT

These connectors are wired in parallel with the MAIN OUT and carry the main
mix signal (unbalanced). Connect the

CD/TAPE OUTPUT

to the inputs of your

recording device. The final output level can be adjusted via the high-precision
MAIN MIX fader.

If you connect a compressor or a noise gate after the 2-track

◊

output, the faders will probably not be able to create a satisfactory
fade-out effect.

Level meter and monitoring

2.3.6

Fig. 2.11: Control room/phones section, level meter

CD/TAPE