6
ULTRAPAR UP1000
5. CLEANING THE REFLECTOR
s
Disconnect the spotlight from the mains and remove the lamp casing as described in chapter
2.1.
s
Remove the color frame (chapter 4), the protective mesh and lens (chapter 3.1), so that the
reflector is easily accessible.
s
Cleaning the reflector: Use oil-free compressed air or a soft, lint-free cotton cloth. Tenacious
stains can be removed by adding some mild soap water, however, dont forget to remove all
soap water remnants as well!
s
Remount the spotlight (see chapters 2.1 and 3.2).
+
Never clean the reflector with commercial window cleaners, as the chemical
substances contained in these agents can damage the reflective coating!
+
Dont use paper towels or other material with a rough surface to wipe the reflector
clean, so as to avoid scratches damaging the reflector surface.
6. SUSPENDED INSTALLATION
Use the mounting bracket
to attach your spotlight to a stand or truss. Always use steel screws
with a diameter of approx. 12 mm to fasten the spotlight. Your UP1000 must be secured with an
additional safety steel cable
. Use the steel cable fixed to the spotlight casing (eyelet
). Once
the spotlight has been adjusted, it must be secured in place with the locking screw
.
7. SPECIFICATIONS
Power
575 W max. (220 V / 240 V)
Max. room temperature
Ta = 45°C
Max. temperature of exterior
surfaces
Tmax = 175°C
Dimensions (Height * Diameter)
approx. 11 3/4" (300 mm) * 9 1/4" (237 mm)
Weight
approx. 3.2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without further notice. Specifications and appearance may differ from those listed or shown.
7. SPECIFICATIONS
