Behringer U-PHORIA UMC22, Руководство пользователя

Страница: 5 / 8

5
3. Connect the StreamBoxx -­ Step by Step
1.
Connect the StreamBoxx and the Audio Interface with the supplied USB cable (white dot).
2. Connect a LAN/Ethernet cable (not included in the delivery) to the LAN socket (neon orange
dot). As soon as the box is connected to the Internet, two LEDs next to the socket will light
up.
3. Connect the device to power (light blue dot).
4.
Connect your audio source (red dot). Get the SUM OUT Signal from the mixing console via
XLR or jack cable. You are not using a mixing console? You can also directly plug in a
microphone.
5. Adjust the volume of the incoming signal from the mixer with the button "GAIN 1" (green
dot). If the signal is too loud, the CLIP LED lights up red. Adjust the signal until the SIG LED is
green.
6.
Optionally, you can check if the StreamBoxx gets an audio signal by plugging headphones
into the
headphone port (blue dot). To listen to the signal, the "DIRECT MONITOR" button
must be pressed. The headphone volume can be regulated with the button "OUTPUT" .
4. Create your account profile and pair it with your
StreamBoxx
1. Join for free by clicking on the following link: http://voicerepublic.com/users/sign_up and fill
in the required data.
2. To use a Voice Republic StreamBoxx, it needs to be connected with your account. You can do
this by pairing the hardware (the StreamBoxx) with your Voice Republic account.
3.
To pair your StreamBoxx with your account, it must be connected to power and to the Internet
(via LAN).
4.
On the above menu bar click on „PUBLISH“.
5. Go to the Device Page by clicking on TEST LIVE STREAM. You are now at your stream-­‐monitorig
site.