Page 2 of 2
For service, support or more information contact the BEHRINGER location nearest you:
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: [email protected]
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: [email protected]
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: [email protected]
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands. 985-10000-00387
Specifications
Transducer type
condenser, 16 mm (0.63")
Polar pattern
cardioid
Connector
gold-plated balanced XLR
connector
Open circuit sensitivity
-38 dBV (0 dBV = 1 V/Pa)
(@ 1kHZ)
Frequency response
20 Hz to 20 kHz
Level attenuation
-10 dB, switchable
Low-cut filter
6 dB/oct. @ 120 Hz (switchable)
Max. SPL
136 dB
(≤ 1 % THD @ 1 kHz)
Nominal impedance
75 Ω
Load impedance
> 1 kΩ
Supply voltage
+48 V
Supply current
3 mA
Dimensions
Ø shaft: 0.9", length: 3.7"
Ø shaft: 23 mm, length: 94 mm
Weight
approx. 0.66 lbs/approx. 0.30 kg
Please note these specifications are preliminary and conceptual in nature, and as such are
subject to change as product development progresses. This information is supplied for
market research purposes only and is not to be made public in any manner. This document is
solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered
upon request of the owner.
The cardioid pickup pattern provides
unparalleled sound source separation and
feedback rejection. C-4 mics contain ultra
low-noise transformerless FET input circuitry
that can handle extreme dynamics (from
20 Hz to 20 kHz) and has a maximum sound
pressure level of 136 dB. So even if the
featured performer at your next recording
session or live show happens to be a
revved-up jet engine, this workhorse mic
will not distort!
C-4 mics also feature a switchable
low-frequency rolloff to eliminate infrasonics
(mic handling noise, nasty sound created by
creaky stages), as well as a switchable -10
dB input attenuation to accommodate for
hot signals, such as a really loud vocalist or
overzealous cellist.
Live Recording
XENYX 802
UCA222
USB Audio Interface
C-4
Choir
Laptop
Live Performance
XENYX 802
EUROLIVE B215D
Acoustic
Grand Piano
C-4
But wait, there’s more…
The C-4 mics not only sound great,
they come packed with custom stand
adapters, windscreens, a stereo bar for
mounting both mics in stereo alignment,
and a transport case. As soon as you break
them out of the box, these mics are ready
to become a mind-blowing addition to
your sound arsenal.
Switchable low-
frequency roll-off
Switchable -10 dB
input attenuation
The transducer
is where the C-4
collects sound
Gold-plated XLR
output
SINGLE DIAPHRAGM
CONDENSER
MICROPHONES C-4