Behringer RD-9, Руководство пользователя

Страница: 20 / 38

20
RHYTHM DESIGNER RD-9 User Manual
11.14 DATA MODE
The
DATA MODE
button toggles between the four available parameters and uses
the DATA control to adjust parameters:
1. TEMPO – sets the speed of the current pattern or song. Depending
on how the RD-9 is configured will result in how tempo is affected.
For example, if the Tempo parameter is set to global, all songs and
patterns will be forced to the tempo set by the DATA control. See the
TEMPO section for more information.
2. S WING –
changes pattern step timings by quantizing each drum
beat to the nearest step and then delaying the playback of every
other step in the pattern. The DATA control adjusts the Swing range
from 25% negative swing to 50% (straight), then on to 75%
(Full Swing).
3. PROB (probability) – In PROB settings menu you can select the
steps as described earlier in this manual. The global settings allow
you to adjust the probability that these steps will play programmed
note events. This is a number can be set anywhere in between
0%-100% range to simulate a human element to patterns.
4. FLAM –
Part of a pattern of RD-9, consisting of a stroke preceded
by a grace note. Range 0-24 adjust the width of the flam. Flam is
the simulated effect of a drummer hitting a note with 2 sticks. The
amount of flam dictates the length of time between the next hit after
the first and can be programmed per step.
12. Software Updates
The RD-9 SYNTHTRIBE app can be downloaded by going to www.musictribe.com.
Please follow the steps on the website and updater to update your RD-9.
To check the current firmware version:
1.
Press SETTINGS.
2. While holding the TAP/HOLD button press PREFS (STEP BUTTON 5).
3.
The LCD will display the firmware version.
4. Press SETTINGS to exit.
It is possible to perform a full factory reset by following these steps, please note
this clears all songs, settings and pattern data and is not reversable.
To reset to default factory settings:
1.
Press settings.
2. Hold Tap/Hold and press step key 16
3.
The display will now say Wait.
4. When the factory reset is complete the
RD-9 will reboot automatically.
(1) (2) (3) (4)