3. If the Bluetooth device prompts for a passcode, use “0000”.
4. When pairing is successful, the INDICATOR LED will light a
steady blue.
PAUSE button for about 3 seconds.
the connection.
If the headphones have previously been paired with a Bluetooth
device, the headphones will automatically connect with that
device if the device is powered on and within range. If not, the
headphones will enter standby mode, and the INDICATOR LED will
light a steady blue.
NOTE:
If you want to connect your headphones to another
Bluetooth audio device, you need to disconnect the current device
Using a Bluetooth device
1. When successfully paired, sound from your Bluetooth device
will be audible through the headphones
2. Press the POWER/PLAY/PAUSE button to pause playback. Press
again to resume playback.
3. Short press the FORWARD/BACK buttons to adjust the
headphone volume. You can also adjust the volume directly on
your paired Bluetooth device.
4. Long press the FORWARD/BACK buttons to select your desired
NOTE:
the BLUETOOTH LED indicator will blink blue
during playback.
Using the AUX IN jack
1. Insert one end of the audio cable into the LINE OUT or
headphone jack on your external audio device.
2. Connect the other end of the cable to the AUX IN 3.5 mm stereo
jack on the headphones.
NOTE:
If the headphones are in ON mode, the headphones will
work as normal, wired headphones.
3. Begin playback on the external device. The external device’s
sound output will be heard through the headphones.
4. To adjust volume, use the volume control on the external
audio device.
5. When done, stop playback on the external device and
disconnect the audio cable from the AUX IN jack on
the headphones.
Receiving a phone call
These headphones are equipped with a built-in microphone,
which allows you to make calls on a Bluetooth-enabled mobile
phone. Make sure your Bluetooth-enabled mobile phone is
paired with the headphones. When a call comes in to the
connected mobile phone, you will hear an incoming call alert on
the headphones. Your headphones and mobile phone should be
within 10 m (33 ft) of each other.
1. Short press the POWER/PLAY/PAUSE button to answer the
incoming call.
2. Long press the POWER/PLAY/PAUSE button to reject the call.
3. Short press the POWER/PLAY/PAUSE button again to end
the call.
To prevent possible hearing damage, do not listen at high
volume for long periods.
Troubleshooting
No power
•Power is not on; Long press
to turn ON the unit.
•Make sure the battery
is charged.
The Bluetooth device
cannot pair or connect
with the headphones.
•You have not activated the
Bluetooth function on your
device. Refer to your device’s
user manual to activate the
Bluetooth function.
•The unit is already paired
with another Bluetooth
device; disconnect that device
and then try again.
CAUTION:
to avoid damage, scratches or bracket deformation when not
in use.
• Please do not bend or twist the bracket to avoid deformation.
• Please do not tear out the ear cushions or allow to be removed
by unauthorized personnel.
• Do not use the headphones in dangerous areas or areas where
you cannot hear the outside sound.
