background image

7

MINIFBQ FBQ800 User Manual

2) 

If you want to:

• 

emphasize the sound, do one of the following:

• 

Slide the relevant fader up. The FBQ800 boosts 
the signal level in the relevant frequency band.

• 

Slide the faders for the surrounding frequency 
bands down. The FBQ800 cuts the signal level 
in the surrounding frequency bands.

• 

de-emphasize a sound, do one of the following:

• 

Slide the relevant fader down. The FBQ800 cuts 
the signal level in the relevant frequency band.

• 

Slide the faders for the surrounding frequency 
bands up. The FBQ800 boosts the signal level in 
the surrounding frequency bands.

◊ 

When you choose to cut rather than boost the signal level, 
you protect audio equipment from high signal levels 
(clipping) and preserve valuable headroom.

2.3  Rear panel

This chapter describes what you need to know about setting up 
the FBQ800.

(10)

(13)

(12)

(15)

(14) (11)

Fig. 2.2: FBQ800 rear panel

◊ 

Before you plug the power supply unit in the FBQ800, 
turn off the 

 (power) button.

(10) 

POWER

 connector: To power the FBQ800, plug the power supply 

unit in this connector. The power supply unit is delivered with 
the FBQ800.

To send the 

input signal

 to the FBQ800, use one of the 

following inputs:

(11) 

RCA 

INPUT

L

 (left) and 

R

 (right): for RCA plugs

(12) 

¼" TRS 

INPUT

L

 (left) and 

R

 (right): for TRS (balanced) or, 

alternatively TS (unbalanced) plugs

If you simultaneously use both RCA and TRS INPUTs,  
the FBQ800 receives the input signal only via the TRS INPUT  

(12)

To work with:

• 

a stereo signal, use 

both

 the L and R connectors

• 

a mono signal, use 

only

 the L or, alternatively the 

R connector

To send the 

output signal

 from the FBQ800, you can use the 

following types of outputs:

(13) 

¼" TS 

OUTPUT

L

 (left) and 

R

 (right): for TS (unbalanced) plugs

(14) 

RCA 

OUTPUT

L

 (left) and 

R

 (right): for RCA plugs

You can simultaneously use both TS and RCA OUTPUTs. 
Whether or not you use both the L and the R connectors 
depends on the type of input signal the FBQ800 receives. 
When the FBQ800 receives:

• 

a stereo signal, use 

both L and R OUTPUT

 connectors. 

The output signal is also a stereo signal.

• 

a mono signal via an L INPUT connector, use 

only 

L OUTPUT

 connectors. The output signal is also a 

mono signal.

• 

a mono signal via an 

R

 INPUT connector, use 

only 

R OUTPUT

 connectors. The output signal is also a 

mono signal.

(15) 

SERIAL NUMBER

: To register your FBQ800, use this unique 

serial number.

For details about audio plugs, see 

4. Audio Connections

.

3.  Setup Example

The following graphically highlights the role of the FBQ800 in your 
audio setups:

XENYX 1204FX

EUROPOWER 
EP2000

L & R Input

L & R Output

MINIFBQ FBQ800

Fig. 3.1: Setup example

Keep in mind that the previous illustration provides only a single 
example of how you can use the FBQ800. You can also set the FBQ800 
up in the insertion paths of mixers.

About setting up with other MINI products

The FBQ800 belongs to the MINI suite of BEHRINGER products. You can 
set up the FBQ800 with these products, which is both convenient and 
attractive. For details, see 6. Other Mini Products.

Содержание MiniFBQ FBQ800











Отзывы: