Behringer FOUR PLAY, Быстрый старт

Страница: 5 / 9

(EN)
Controls
FOUR PLAY
(1)
CV IN – Each channel has its own CV input
which is cascaded to the channels below,
provided that they do not have a CV cable
inserted. If only CV IN 1 is connected it will
control all 4 channels. Each CV input has
an associated CV LED which lights green
for a positive CV (VCA gain) and red for a
negative CV (VCA attenuation), if the CV IN
voltage is 0V then the LED does not light.
(2)
CV ATTENUATOR – Each channel has a CV
Attenuator, which can reduce the CV input
signal level when moved CCW.
(3)
BOOST – Each channel has a switchable
Boost control, which raises the input gain
by +6 dB when the switch is set in the
right-hand position.
(4)
CURVE – Each channel has a continuously
variable VCA response curve, ranging from
exponential at full CCW to linear at full CW.
(5)
LEVEL – Each channel has its own overall
VCA output level control. The response of
the Level control is affected by the Curve
control setting.
(6)
INPUTS – Each channel has its own
input, which can be used with audio or
CV input signals.
(7)
OUTPUTS – Each channel has its own
output, which is mixed with channels to
the right if no output cable is inserted
into that channel output. If only the 4/
Mix output jack is connected the module
operates as a 4 into 1 mixer, which can
be operated manually using the Level
controls, or voltage controlled via the
CV inputs.
(1) (2) (3) (4)
(5)
(6)
(7)
9
Quick Start Guide
8
FOUR PLAY