Page 8 of 8
For service, support or more information contact the BEHRINGER location nearest you:
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: [email protected]
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: [email protected]
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: [email protected]
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands. 985-10000-00283
MONO INPUTS
Microphone inputs (XENYX Mic preamp)
Type
XLR connector, electronically balanced,
discrete input circuit
Mic E.I.N. 1 (20 Hz – 20 kHz)
@ 0 Ω source resistance
-134 dB/135.7 dB A-weighted
@ 50 Ω source resistance
-131 dB/133.3 dB A-weighted
@ 150 Ω source resistance -129 dB/130.5 dB A-weighted
Frequency response
<10 Hz-160 kHz
-1 dB
<10 Hz-200 kHz
-3 dB
Gain range
+10 dB to +60 dB
Max. input level
+12 dBu @ +10 dB GAIN
Impedance
approx. 2.6kΩ balanced
Signal-to-noise ratio
110 dB/112 dB A-weighted
(0 dBu In @+22 dB GAIN)
Distortion (THD+N)
0.005%/0.004% A-weighted
Line input
Type
¼" TRS jack, electronically balanced
Impedance
approx. 20 kΩ balanced,
approx. 10 kΩ unbalanced
Gain range
-10 dB to +40 dB
Max. input level
+22 dBu @ 0 dB GAIN
Fade-out attenuation
2
(Crosstalk attenuation)
Main fader closed
90 dB
Channel muted
84 dB
Channel fader muted
85 dB
Frequency response (Mic In
Main Out)
<10 Hz – 90 kHz
+0 dB/-1 dB
<10 Hz – 160 kHz
+0 dB/-3 dB
Stereo Inputs
Type
2 x ¼" TRS jack, balanced
Impedance
approx. 20 kΩ balanced,
10 kΩ Unbalanced
Gain range
-20 dB to +20 dB
Max. input level
+22 dBu @ 0 dB GAIN
CD/Tape in
Type
RCA Connector
Impedance
approx. 10 kΩ
Max. input level
+22 dBu
EQUALIZER
EQ mono channels
LOW
80 Hz/±15 dB
MID
100 Hz to 8 kHz/±15 dB
HIGH
12 kHz/15± dB
LOW CUT
80Hz, 18 dB/oct.
EQ stereo channels
LOW
80 Hz/±15 dB
LOW MID
500 Hz/±15 dB
HIGH MID
3 kHz/±15 dB
HIGH
12kHZ/±15 dB
Channel inserts
Type
¼" TRS jack, unbalanced
Max. input level
+22 dBu
AUX/FX Send
Type
¼" mono jack, unbalanced
Impedance
approx. 120Ω
Max. output level
+22 dBu
FX Returns
Type
¼" mono jack, unbalanced
Impedance
approx. 10 kΩ
Max. input level
+22 dBu
Subgroup outputs
Type
¼" mono jack, unbalanced
Impedance
approx. 120Ω
Max. output level
+22 dBu
Main outputs (XLR)
Type
XLR connector, electronically balanced
Impedance
approx. 240 Ω balanced,
120 Ω unbalanced
Max. output level
+28 dBu
Main outputs (¼")
Type
¼" TRS jack, electronically balanced
Impedance
approx. 240 Ω balanced,
120 Ω unbalanced
Max. output level
+28 dBu
Main Inserts
Type
¼" TRS jack, unbalanced
Max. input level
+22 dBu
Mono output
Type
¼" mono jack, unbalanced
Impedance
approx. 120Ω
Max. output level
+22 dBu
Low pass
variable, 30 Hz to 200 Hz, 18 dB/oct.
Phones/CTRL room output
Type
¼" TRS jack, unbalanced
Max. output level
+19 dBu/150Ω (+25 dBM)
CD/Tape Out
Type
RCA connector
Impedance
approx. 1 kΩ
Max. output level
+22 dBu
DSP
Type
Texas Instruments
Converter
24-bit delta-sigma,
64/128-times oversampling
Sampling rate
46 kHz
Main mix system data
3
(Noise)
Main mix @ -∞,
-100 dB/-102.5 dB A-weighted
channel fader @-∞
Main mix @ 0 dB,
-82 dB/-85 dB A-weighted
channel fader @-∞
Main mix @ 0 dB,
-72 dB/-75 dB A-weighted
channel fader @ 0 dB
Power supply
Power consumption
50 W
Fuse
(100 – 240 V~, 50/60 Hz)
T 2,0 A H 250 V
Mains connector
Standard IEC receptacle
Physical/weight
Dimensions (H x W x D)
3.9 x 35.3 x 16.1"/100 x 896 x 410
mm
Weight (net)
24.3 lbs/11.0 kg
1 Equivalent Input Noise
2 Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz – 20 kHz; line input;
main ouput; unity gain
3 20 Hz – 20 kHz; measured at main output. Channels 1 – 4 unity gain;
EQ flat; all channels on main mix; channels 1/3 as far left as possible;
channels 2/4 as far right as possible; reference = +6 dBu.
Please note these specifications are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not
to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon
request of the owner.
EURODESK
SX3242FX
