Page 7 of 8
CD/TAPE level
control. Between
sets press STANDBY
to mute all active
channels except the
music you’re playing
through the CD/
TAPE input — so
you don’t have to
change the levels of
any channel faders!
60mm SUBmix bus
faders 1, 2, 3 & 4.
Each as a solo switch
and switch to assign
them to master
Left or Right stereo
channels
Gold-plated
CD/TAPE INPUT
RCA connectors
for connecting
MP3 or CD
players or
other line-level
sources
MAIN INSERTs
can be used
to connect
a dynamics
processor
or equalizer
for further
processing of
the mix signal
Balanced/
unbalanced ¼" TRS
MAIN outputs
Balanced XLR
MAIN outputs
FOOTSW(ITCH)
jack for enabling/
disabling FX 1
or FX 2 effects
processors
¼" TRS PHONES/
CTRL ROOM OUT
connector
FBQ Feedback
Detection System
Frequencies
causing feedback
are indicated by
the brightly-lit
fader LEDs
Graphic EQ
IN / out
FX LED level meters
for optimizing
input signal level to
digital effects
11-LED master
level meter
The SOLO/PFL switch
determines whether
the monitored signal
is pre- or post-fader
TALKBACK level
control (can also be
assigned to AUX 1/2)
MONO output
frequency control
and separate LOW
PASS filter
PHONES/CONTROL
ROOM level control
and assignment
switches
60mm mono out
and main stereo out
faders
Switches assign
internal effects
to MAIN bus or
subgroups 1-2 or 3-4
Gold-plated
CD/TAPE
OUTPUT RCA
connectors for
output to USB
interface/hard
disk recorder
or DAT
FX SEND 1 and
2 can be routed
to an external
effects device
Master AUX
SENDs 1 & 2
to external
effects devices
or monitor
speakers
The MONO Out.
Perfect for a
subwoofer
output
SUBGROUP
outputs
9-band stereo
equalizer. Use
to adapt the
sound to room
acoustics or with
the FBQ system
MAIN/AUX 1
switch selects
source of the
signal to be
processed by the
FX section
99 24-bit studio-
quality digital
effects including
reverbs, delays,
gates, phasers etc
Master FX 1 & 2
SEND controls
FX 1 & 2
effects level
and selection
controls
EURODESK
SX2442
