16
17
Quick Start Guide
DIGITAL SNAKE S32
DIGITAL SNAKE S32 Output Confi guration
S32 Output Signals
Outputs >
mixer:
44.1/48 kHz clock sync
Analog
XLR out 1-16
AES/EBU
(AES 3)
ADAT OUT
(Toslink)
P-16 Ultranet
Personal Monitoring
with Turbosound
iQ control
connected to S32 port A
AES50 port A
= AES50-A, ch01-ch16
= AES50-A
ch13-ch14
ch15-ch16
= AES50-A
ch17-ch24
ch25-ch32
= AES50-A ch33-ch48
Specifi cations
Processing
A/D-D/A conversion
(Cirrus Logic A/D CS5368, D/A CS4385)
24-bit @ 44.1 / 48 kHz,
114 dB dynamic range
Networked I/O latency
(stagebox in > console processing* > stagebox out)
1.1 ms
Connectors
Programmable mic preamps, designed by MIDAS, balanced XLR
32
Line outputs, balanced XLR
16
AES/EBU outputs (AES3 XLR)
2
AES50 ports, SuperMAC networking, NEUTRIK etherCON
2
ULTRANET output, RJ45 (no power supplied)
1
MIDI inputs / outputs
1/1
ADAT outputs, Toslink
2
USB port for system updates, type B
1
Mic Input Characteristics
Preamp design
MIDAS
Input impedance XLR, unbal. / bal.
5 kΩ / 10 kΩ
Non clip maximum input level, XLR
+23 dBu
THD + noise, 20 dB gain, 0 dBu out
< 0.008% (< 0.006% A-weighted)
Phantom power, switchable per input
48 V
Equivalent input noise level, XLR (input shorted)
-128 dBu
CMRR, XLR, @ 20 dB gain (typical)
> 70 dB
Input/Output Characteristics
Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB
10 Hz - 22 kHz
Dynamic range, analog mic in to analog out (typical)
104 dB
A/D dynamic range, mic preamp and converter (typical)
106 dB
D/A dynamic range, converter and output
106 dB
Cross talk rejection @ 1 kHz, adjacent channels
100 dB
Output Characteristics
Output level, XLR, nom./max.
+4 dBu / +21 dBu
Output impedance, XLR, unbal. / bal.
75 Ω / 75 Ω
Residual noise level, XLR
-83 dBu (-85 dBu, A-weighted)
Digital In/Out
AES50 SuperMAC networking @ 48 or 44.1 kHz, 24-bit PCM
2 x 48 channels, bidirectional
AES50 SuperMAC cable length, CAT5e shielded**
up to
100
m
ULTRANET networking @ 48 or 44.1 kHz, 22-bit PCM
1 x 16 channels, unidirectional
ULTRANET cable length, CAT5 shielded
up to 75 m
ADAT output @ 48 or 44.1 kHz, 24-bit PCM
2 x 8 channels, unidirectional
Toslink optical, cable length
5 m, typical
AES/EBU output @ 48 or 44.1 kHz, 24-bit PCM
2 x 2 channels, unidirectional
XLR, 110 Ω balanced, cable length
5 m, typical
Power
Switch-mode autorange power supply
100-240 V (50/60 Hz)
Power consumption
55 W
Physical
Standard operating temperature range
5°C to 40°C (41°F to 104°F)
Dimensions
483 x 242 x 138 mm (19 x 9.5 x 5.4")
Weight
5.6 kg (12.4 lbs)
*includes all channel and bus processing, excluding insert eff ects
**KLARK TEKNIK NCAT5E-50M recommended
NOTE: Please verify that your specifi c AES50 connections provide stable operation prior to using the products in a live performance or recording situation. The maximum distance for
AES50 CAT5 connections is 100 m / 330 ft. Please consider using shorter connections where possible for gaining safety margin. Combining 2 or more cables with extension connectors
can reduce the reliability and maximum distance between AES50 products. Unshielded (UTP) cable may work well for many applications, but entails an additional risk for ESD issues.
We guarantee, that all our products will perform as specifi ed with 50 m of KLARK TEKNIK NCAT5E-50M, and we recommend using cable of similar quality, only. KLARK TEKNIK also
off ers the very cost-eff ective DN9610 AES50 Repeater or DN9620 AES50 Extender for situations where extremely long cable runs are required.
