3
.
Place the included shock absorption circle pad into the bottom of your gimbal
with the adhesive side down. Remove the adhesive while the cushion pad is inside
the gimbal and press onto the quick release plate. The cushion pad will adhere to
the quick release plate.
4
.
Tension Spring Adjustment: After the gimbal and camera are mounted, adjust
the tension screws, so that when you lift the Flex Handle Stabilizer the handles fall
to roughly 15 degrees. Make sure the two tension screws are leveled with each
other. Please see image below for reference.
6
2017 Beholder
5
6
Tension Adjustment Screws
