Behnke 10 Series, Инструкция по эксплуатации

Страница: 47 / 80

47 www.behnke-online.com
GB
Instructions for Behnke SIP 2.0
Reset to default settings
The web interface offers a second option to
reset the device to its default settings, to do
so, please take the following steps:
Admin
Reset
Restore
5.
reset to default settings
Complete the following steps to reset the
remote station to its default setting:
▸ Disconnect the power supply to your SIP
remote station
▸ Press buttons T1 and T2 simultaneously and
keep them pressed
▸ Reconnect the power supply to your SIP
remote station
▸ Keep buttons T1 and T2 pressed until two
LEDs (green, blue) start flashing every
second
▸ Release buttons T1 and T2
▸ The remote station will be reset to default
settings; this process takes approx. 90
seconds
Successful completion of the reset will
be confirmed by the speakers emitting a
confirmation tone.