8
Specifications subject to change without notice. OM-KSACN06(7)01-01
INITIAL SETUP
Set the current day and time
NOTE: The Wired Controller can be powered
ON or OFF during this step.
1. Press
TIMER
for 2 seconds or more to set
the current date and time. The
TIMER
display
flashes (see Fig 5).
Fig. 5 —Timer
2. Press the
UP
or
DOWN
arrow (Fig. 6) to
set the week day; the selected week day
will flash (Fig. 7).
Fig. 6 —Up or Down Arrows
Fig. 7 — Days of the Week
3. Press
TIMER
to confirm. If there is no
button pressed within 10 seconds, the
displayed week day will be saved.
4. Press the
UP
or
DOWN
arrows
(Fig. 6) to
set the current time. Press repeatedly to
adjust the current time in 1-minute
increments. Press and hold to adjust the
current time continuously. Press
TIMER
to
confirm. If there is no button pressed within
10 seconds the displayed time is saved.
Fig. 8 — Week Day and Time
5.
Time scale selection:
Press
TIMER
Fig. 5 — on page 8) and
DAY OFF
for 2 seconds to alternate the clock time
display between the 12 hour and 24 hour
formats.
Fig. 9 — Timer
ex. Monday 11:20