29
2.0 Welding
2.1 Set up of the belts that need to be welded
•
Recommendation: Heating up the belts to room temperature to achieve
the best welding result.
•
Cut the ends of the belt to be connected flat.
•
Fix the belt in the guide clamp FZ01 or FZ02/3 or the flat belt in the
guide clamp FZ02/3F and align the ends.
2.2 Set up of the EErgo paddle welding tool
•
Plug in the welding tool into the socket.
•
Set up the temperature by pressing the button TPE or PU.
•
Red LED indicates that the tool is heating up.
•
Wait with welding until the LED lights up green.
•
To change the temperature press the corresponding button.
•
The red LED indicates either that the product is heating up or cooling
down.
•
Wait with welding until the LED lights up green.
•
Check the temperature of the paddle welding plate using a temperature
measuring device with surface sensor every now and then.
