BEHA ORC 1527, Инструкция по эксплуатации

Страница: 25 / 27

Operation
Under Standby
0RGH
, press the knob (or remote controller button), the heater
enters into the Normal
0RGH
, works with highest power, and automatically set the
temperature at 35
℃
, or recover to the state of the last standby state (Note: when the
power is not cut off). Repeatedly press the knob till the heater recovers to the
Standby state.
Under OFF state, press the button (or remote controller button) to enter into
the timing enquiry interface, the setting time and timing icon flashed, turn the
knob to adjust the setting time, it will automatically exit the enquiry setting interface
if it is not operated within 3s. When the setting is 0, it cancels timing ON. After
reaching the timing ON time, the heater automatically turns on and works at the last
standby state. The time setting range is 0-24H, the adjustment step is 1h.
Under normal mode, press the button (or remote controller button or
button) to check thecurrent setting temperature, and the temperature icon
flashes. Turn the knob to adjust the setting temperature, it will automatically exit
the enquiry setting interface if it is not operated within 3s, and display the setting
temperature.
Under Working State, press the button (or remote controller button), the
heater switches between Normal
0RGH
–fast-heating model -- Energy Saving
0RGH
--- Anti-Freezing
0RGH
--- Normal
0RGH
.
[ON/OFF]
[Mode Switch]
[Level Switch]
[Temperature Setting]
[Timing ON]
[Timing OFF]
Under normal mode, repeatedly press the knob (or remote controller button) to
switch between High (orange) ---
0LGGOH
(green) ---
/RZ
(red) --- OFF --- High
(orange).
Under ON state, press the button (or remote controller button) to enter into
the timing enquiry interface, turn the knob to adjust the setting time, it will
automatically exit the enquiry setting interface if it is not operated within 3s. When the
setting is 0, it cancels timing OFF. After reaching the timing OFF time, the heater
automatically enters into the standby state and stops work. The time setting range is
0-24H, the adjustment step is 1h.
25