Limited Warranty and Limitation of Liability
Your Beha-Amprobe product will be free from defects in material and
workmanship for two years from the date of purchase unless local laws
require otherwise. This warranty does not cover fuses, disposable batteries
or damage from accident, neglect, misuse, alteration, contamination,
or abnormal conditions of operation or handling. Resellers are not
authorized to extend any other warranty on the behalf of Beha-Amprobe.
To obtain service during the warranty period, return the product with
proof of purchase to an authorized Beha-Amprobe Service Center or to
a Beha-Amprobe dealer or distributor. See Repair Section for details.
THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES
- WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING
IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE
OR THEORY. Since some states or countries do not allow the exclusion or
limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you.
Repair
All Beha-Amprobe tools returned for warranty or non-warranty repair
or for calibration should be accompanied by the following: your name,
company’s name, address, telephone number, and proof of purchase.
Additionally, please include a brief description of the problem or the
service requested and include the test leads with the meter. Non-warranty
repair or replacement charges should be remitted in the form of a check,
a money order, credit card with expiration date, or a purchase order made
payable to Beha-Amprobe.
In-warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before
requesting repair. During the warranty period, any defective test tool can be
returned to your Beha-Amprobe distributor for an exchange for the same or
like product. Please check the “Where to Buy” section on beha-amprobe.
com for a list of distributors near you. Additionally, in the United States and
Canada, in-warranty repair and replacement units can also be sent to an
Amprobe Service Center (see address below).
Non-warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Beha-Amprobe
distributor for a nominal charge. Please check the “Where to Buy” section
on beha-amprobe.com for a list of distributors near you.
Beha-Amprobe
Division and reg. trademark of Fluke Corp. (USA)
Germany*
United Kingdom
In den Engematten 14
52 Hurricane Way
79286 Glottertal
Norwich, Norfolk
Germany
NR6 6JB United Kingdom
Phone: +49 (0) 7684 8009 - 0
Phone: +44 (0) 1603 25 6662
beha-amprobe.de beha-amprobe.com
Fluke Europe B.V.
PO Box 1186
5602 BD Eindhoven
The Netherlands
Phone: +31 (0) 40 267 51 00
beha-amprobe.com
*(Correspondence only – no repair or replacement available from this
address. European customers please contact your distributor.)
**single contact address in EEA Fluke Europe BV
