ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
5/55
MAGIC LED II ~ MYSTERY LED II
DMX-CONFIGURATION OF MYSTERY LED II & MAGIC LED II:
1 CHANNEL MODE
3 CHANNEL MODE
Two DMX-modes are available: 1CH and 3CH mode:
1 channel mode:
Extremely user friendly mode: you only need 1 DMX channel to choose 1 of the 11 preprogrammed
sound chases or you can use our Effect commander to switch the unit ON/OFF (no switch pack needed).
3 channel mode:
You can take full control of all functions of
the effect.
Channel 1: control for strobe
Channel 2: select one of the 32 available
color combinations.
Channel 3: Rotation speed and direction
HOW TO SETUP:
MAIN MENU:
To select any of the menu options, press the
MENU
button up to when the required one is
shown on the display.
Select the function with the
ENTER
button.
The display will blink.
Use
DOWN
and
UP
button to choose the
desired menu option.
Once the required menu option is selected,
press the
ENTER
button to select. To go back
to the functions without any change press the
MENU
button or just wait 8 seconds. The
menu structure is shown below.
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
6/55
MAGIC LED II ~ MYSTERY LED II
DMX512 Address Setting
Used to set the starting address in a DMX setup.
Press the MENU button until
is shown on the display.
Press the ENTER button, the display starts blinking.
Use DOWN and UP buttons to change the DMX512 address.
Once the correct address shows on the display, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
Press the MENU button for about 2 seconds to return to running mode.
Channel Mode
Used to set the number of DMX-channels.
Press the MENU button until
is shown on the display.
Press the ENTER button, the display starts blinking.
Use DOWN and UP button to select the
(1 Channel) or
(3 Channel) mode.
Once the mode is selected, press the ENTER button to setup
(or automatically return to the main functions without any change after 8 seconds)
Press the MENU button for about 2 seconds to return to running mode.
Working Mode
Used to set the unit in master or slave mode.
Press the MENU button until
is shown on the display.
Press the ENTER button, the current working mode starts blinking in the display
Use the DOWN and UP buttons to select
(master),
(slave in sync with the master) or
(2 light show – slave in anti-sync with the master).
Once the mode is selected, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
Press the MENU button for about 2 seconds to return to running mode.
Show Mode
Used to choose to select one of the preprogrammed shows when used in standalone or master/slave
mode.
Press the MENU button until
is showing on the display.
Press the ENTER button, the current show starts blinking in the display.
Use DOWN and UP buttons to select one of the 8 preprogrammed shows
(show 0) to
(show 8)
Once the right show blinks on the display, press the ENTER button to save it.
(or automatically return to the main functions without any change after 8 seconds)
Press the MENU button for about 2 seconds to return to running mode.
Sound Mode
Used to choose the desired sound mode to trigger the shows.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select one of the available modes:
(sound mode ON)
the shows are triggered by the internal microphone.
(sound mode OFF)
the shows are triggered by the speed selected with the shows.
Once the right mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to return to running mode.
