BEGLEC iSolution IMOVE-5S, Руководство пользователя

Страница: 7 / 11

7A
5.4 DMX512 Configuration
Ch 1 Ch 2 Ch 3 Ch 4 Ch 5 Ch 6 Ch 7
IM-5S Pan Tilt Shutter/Sharking Gobo Color
IM-5W Pan Tilt Shutter No function Color No function Dimmer
Stand by Blackout the unit
Function
Strobe
1.Gobo/Color sync
strobe
2.Sync. strobe
3.Two-light strobe
X/Y moving show mode
selection
( Show 1 ~ Show 4 )
Please refer to Show mode
in 4.2 Main Function.
.
Color/Gobo selection
1. Hold on for gobo
change.
2. Press shortly for
color change.
X/Y moving setting
1.Pan position
2.Tilt position
First set Master unit,
then set Slave units’
position.
IM-5S
Mode
Sound 1
(LED off ) Sound 2
(LED normal blinking) Slow/Sound 3
(LED on) Position/ Latch
(LED fast blinking)
Stand by Blackout the unit
Function
Strobe
1.Gobo/Color sync
strobe
2.Sync. strobe
3.Two-light strobe
X/Y moving show mode
selection
( Show 1 ~ Show 4 )
Please refer to Show mode
in 4.2 Main Function.
.
Color selection X/Y moving setting
1.Pan position
2.Tilt position
3.Dimmer
First set Master unit,
then set Slave units’
position.
IM-5W
Mode
Sound 1
(LED off ) Sound 2
(LED normal blinking) Slow/Sound 3
(LED on) Position/ Latch
(LED fast blinking)
5.3.1 iSolution Operation
♦ Consistent DMX configuration enable iMove to be linked together with iRock and iShow
and controlled at the same time.
♦ DMX address can be set remotely by iLead controller ( please refer to the user manual
of iLead controller ). No need to calculate the DMX channels of each fixture in the chain.
♦ Automatic switching between DMX function and built-in stand alone programs.
5.3.2 DMX Controller
If you use a universal DMX controller to control the units, you have to set DMX address from
1 to 512 channel so that the units can receive DMX signal.
Press the MENU button up to when the is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press and keep ENTER button pressed up to when
the display stops blinking or storing automatically 8 seconds later. To go back to the
functions without any change press the
MENU button again. Please refer to the following
diagram to address your DMX512 channel for the first 4 units.
DMX address can be setting remotely by IL-0824 controller. No need to calculate the DMX
channels of each fixture in the chain.