Beghelli NOVA NV-10KW Скачать руководство пользователя страница 17

Страница: 17 / 82

Callout Component Name

Description

Terminal block for removing heat sink

assembly (TB4) 6KW, 8KW
Behind hinged panel for all others

5-position terminal block (TB4). This terminal block

provides quick and easy removal of power assembly.

Fan transformer, Control power transformer

(T2) 6KW, 8KW
Behind hinged panel for all others

Provides 120 VAC to the fans, with taps to match unit

output voltages.

Control transformer fuse (F1), 6KW, 8KW
Behind hinged panel for all others

Control transformer over current protection.

Fan fuse (F2) 6KW, 8KW Behind
hinged panel for all others

Fan overcurrent protection.

Fan(s) and under heatsink

Provides system cooling.

Output isolation transformer T1, as required

Provides isolation between the inverter and protected

output. Power to the primary of this transformer is

received from the unit and is transformed to the

appropriate output voltage levels. It also adds a

screen to the main menu.

Inverter test switch (S2)

Push-button switch for testing the Lighting Inverter

and its batteries for proper operation. When the unit

is operating, pressing and holding in switch SW-2

transfers the system to battery operation. The system

continues to run on batteries until the switch is

released. When the switch is released, the system

returns to normal operation so long as input power is

present.

(Main Input breaker (CB3)

Provides input overcurrent protection.

Battery breaker (CB1)

Provides overcurrent protection for battery bank.

Main output breaker (CB2)

Provides output overcurrent protection.

(Optional) Output Auxiliary Breakers

Normally ON/OFF Output Auxiliary Breakers (6)

(Optional).

(Optional) Gnd/Neu terminals

Gnd/Neu terminals for optional auxiliary output

breakers (optional).

Bypass switch

Optional: Removes the critical load from the backup

power and provides utility input directly to the load in

case the unit malfunctions or during system

maintenance (optional). Refer to 3.2.5 page 7 for

detail.

(Optional) TVSS (Transient Voltage Surge

Suppressor)

This option is a no-fuse, fail-safe surge suppressor

featuring a fail-safe self-protected design, visual

indicator.

(Optional) Interfaces terminal blocks for

customer connection (General location)

Options customer connections i.e. form “C” contact

terminals, RS232…....each terminal is marked

accordingly for proper connection refer to each

option for connection details in each cabinet size.

Beghelli U.S.A., 3250 Corporate Way, Miramar, Florida, Tel: (800) 726-4316 Tel: (954) 442-6600 Fax: (954) 442-6677

NOVA

6, 8, 10, 15 & 17KW

Содержание NOVA NV-10KW



















































































Результаты поиска

Содержание NOVA NV-10KW

Отзывы:

Похожие инструкции для NOVA NV-10KW

Бренды по названию

Популярные бренды

Beghelli NOVA NV-10KW, Инструкция по установке и эксплуатации

Результаты поиска

Содержание NOVA NV-10KW

Отзывы:

Похожие инструкции для NOVA NV-10KW

Бренды по названию

Популярные бренды