To install the luminaire, mark and drill mounting holes in
the structure on which the luminaire will be mounted.
Using appropriate hardware (supplied by others), attach
the luminaire yoke to the stationary structure.
To make wire connections, route the power cord to an
appropriate junction box.
Make supply connections inside junction box (see Wiring
Diagram).
Replace junction box cover.
To adjust the vertical position of the luminaire, use a hex
wrench to loosen the adjustment screw, and reposition
the luminaire head to the desired position, then re-tight-
en the bolt.
1.
2.
3.
4.
5.
YOKE MOUNT (YM)
MULTIPURPOSE AREA LIGHT (MPL)
INSTALLATION INSTRUCTIONS
