Be sure the distance between main loading
point and Cr point must be more than 150 mm.
Please contact the child restraint
manufacturer if in doubt about this point.
4.4 Main loading point
Main loading point
150
Сr
4.3.2 Installation of child seat:
Spin the backrest 180
º
to separate the seat base
and the backrest. The seat base can be installed
independently in the car.
Remove the backrest
Make the two connector into the two base holes,
then make it stand upright.
Installation the backrest
5. Installation and Remove the backrest
Step 1: Remove the harness straps and
buckle following the operation of 3.7.
Step 2: Take off the headrest cushion and
seat cushion.
Step 3: Remove the backrest following the
operation of 4.3.1.
Step 4: Place your child in the child seat.
Step 5: Place the diagonal belt through
your child's chest, and then place the lap
belt through the two guide hooks under
arm rest of child seat.
Step 6: Fasten the buckle of car seat until
you hear a clear “Click”. Check whether the
buckle is locked safely by pulling the
shoulder straps upwards.
Page 10 of 11
Содержание BFL100
Страница 1: ...Group I II III Baby safety car seat...