BEFCO C30-CE5H, Руководство оператора

Страница: 12 / 52

CAUTION: Engine is shipped without oil. Fill oil reservoir to the correct level
before starting the engine. See the engine manufacturer’s operator’s manual for
further information on engine.
To assemble the C30-CE5H mower proceed as follows:
1. Using a crow bar open the top of the crate then remove the sides of the crate.
2. Add oil to the engine. Use the dip stick to fill to the correct level.
3. Position the drawbar inside the drawbar attachment bracket and secure it in place
using the Ø19 pin and Ø4 cotter pin.
4. Secure the hitch bracket to the drawbar using two Ø19 pins and two Ø4 cotter pins.
Use the holes that will allow you to keep the drawbar as level as possible when
attached to the tractor. Ball joint will arrive already assembled to hitch bracket.
Note: All hardware needed for assembly will be found on the machine. Assembly will be
easier if all parts are loosely assembled before tightening the hardware.
3.04 - Cutting Height Adjustment
WARNING: Keep hands and feet away from moving blades.
Be sure both towing vehicle engine and mower engine are off, spark plug wire is
disconnected, parking brake is locked, and key is removed before making any
adjustments.
Before working under mower install blocks under the deck to prevent it from
falling.
O
PERATION
12
BEFCO
C
YCLONE
O
PERATOR
’
S
M
ANUAL
Fig. 4
The cutting height is
adjusted by moving the
height adjustment spacers
on the wheel yokes above or
below the wheel arm.