Befaco KICKALL V1C, Инструкция по сборке

Страница: 3 / 8

KICKALL V1C - ASSEMBLY GUIDE – Apr 2019
TRANSISTORS
Be sure they are orientated correctly. The curved and flat sides of the silkscreen outline of
the transistor on the PCB must match that of the transistor’s body.
Qty Value
Name on PCB
4 2n3906
T1, T2, T3, T100
4 2n3904
T4, T5, Q100, Q101
OPEN ICs FOAM
ICs
Place the sockets
(taking care to orientate them properly – the notch or dot on one end of
the IC should match the image on the silkscreen) and solder them into their correct positions.
Place the ICs in their respective sockets taking note of their orientation – the notch or dot on
the top of the IC must match that of the socket and silkscreen.
Qty Value
Name on PCB
1 3340 IC2
2 LM13700 IC1, IC4
4 TL072
IC3, IC100, IC101, IC102
BAG B
TRIMMERS
Solder the 10k trimmer at ZZZ with the screw facing out from the edge of the PCB.
MALE PIN HEADERS
Place and solder the Male Pin Headers on the silkscreen side of the main board (It is the
shorter pins that you are soldering). Double check they all are perfectly straight.
Qty PINs
Name on PCB
2 2x4 CON_1, CON_2
3