AC/DC v1 - ASSEMBLY GUIDE
JST CONNECTOR
Place the connector in the silkscreen side.
Qty
Size
Place on PCB
1
1X3
MIDI
POWER CONNECTOR
Solder the power connector at “JP9”, ensuring the position is correct: it must be placed over the silkscreen marking
with the pins facing the edge of the PCB.
XIBECA BOARD
In order to place
Xibeca board
properly straight, we will first place socket connectors
in the pcb then place the Xibeca to make sure they are straight. Do this
gently.
Please check pic for orientation, placing Xibeca backwards will destroy it.
Once all pins are in place,
proceed to solder them all.
Remove Xibeca board from the pcb to continue with the assembly.
TROUBLESHOOTING
At this point we will perform a smoke test and check that power arrives to every relevant spot in the boards. This is
very important, as testing all this once mechanical components are soldered will be hard.
This step will minimize he possibility that a mistake will destroy your Xibeca.
Connect both boards then the module to a power supply. Follow the diagram in next page to measure
ALL
marked
voltages. Use the marked GND spot and measure one by one the voltages. Keep in mind control board will be flipped in
order to measure the right spots.
3
Содержание AC/DC
Страница 6: ...AC DC v1 ASSEMBLY GUIDE 6...
