BeeWi BBT200 Series, Руководство пользователя, Страница: 6 / 28

6
- Repeat the step above to complete another pairing with a second receiver.
- When the Streamer is connected to the Bluetooth receiver, the blue indicator
will pulse slowly and it will automatically send the “play” instructions to iPod
to stream the music wirelessly .
3. Connect to already paired Bluetooth receiver(s)
3.1. The Streamer will automatically connect to last paired Bluetooth devices after
power on. If no paired device is found, it will activate a pairing mode (blue indicator
blinking rapidly)
3.2. The Streamer will automatically search for the last played devices to establish
the second connection. If no stored device be found within 1 min, it will enter the
standby mode automatically.
3.3. Short click the button to connect to the paired device when in standby mode
(blue indicator blinking once every 5 seconds) or long press the button for 5 seconds
to activate the pairing mode (blue indicator blinking rapidly).
Note: the Streamer can store up to 2 Bluetooth receivers in pairing list. Once a third
connection is established the very first stored receiver will be replaced.
Note: When one device has been disconnected abnormally during Dual Air stream
circumstance, the remaining active receiver could possibly be playing on and off for
awhile until a normal disconnection is detected.
3.4 Function Matrix
Function
Power on
Pairing / Search
Operation
Short click 1 second
Long press 5 seconds
Indications
(B) Blink rapidly
(B) Blink rapidly
State
Power off
Power on / stand by