Beeverycreative Beethefirst, Быстрый старт

Страница: 19 / 94

19
AFTER PRINTING
After your print is over, you have to remove the object from the table. Try to do it first gen-
tly by hand without damaging it. If you are not able to do it, use the spatula parallel to the
table. If none of these techniques work, remove the blue tape. Don’t forget to replace the
blue tape before printing again.
To fully disconnect your BEETHEFIRST, you should always unplug it from the electrical
socket.
TROUBLESHOOTING
We recommend you read our FAQ and Troubleshooting pages available on the website
www.beeverycreative.com. If you can’t find the solution to a given problem, please contact
our Customer Service Team by using the form available on our website.