Dear customer,
by purchasing the
BBQ Standalone & Table Grill
, you have chosen a quality product from BEEM.
This quickstart guide shows the most important steps for operating and the functions of the appliance.
Make sure you also read the user manual for the appliance.
Elements of Lifestyle
Drip tray
Never operate the appliance without water in the
drip tray otherwise the appliance may overheat,
particularly when the cover is
fi
tted. The
fl
avoured
steam evaporates during grilling and adds
fl
avour
to the food and makes it more succulent.
The drip tray can be used as an aroma depot:
when grilling using the grate, you can add ingre-
dients such as herbs, wine, beer, or cognac. The
aromatised steam gives your grilled food a very
special taste.
Before grilling, always
fi
ll the drip tray with water up
to the „MAX“ mark.
Re
fi
ll the drip tray after 1 1/2 to 2 hours with
approx. 1 l water.
When re
fi
lling the drip tray, do not pour water over
the hot heating element but over the opening in the
middle of the grill plate instead.
Cover
First mount the handle of the cover as described in
the package lea
fl
et.
The hook for hanging the cover is hung into the ho-
les of the of the handle. For this purpose, pull the
hooks apart from each other at the ends and hang
the ends into the holes of the handle. To remove
the hook, pull the ends apart lightly.
If you use the appliance as a standalone grill, you
can hang the cover vertically into the appliance.
This means that you hands are free to turn over the
food to be grilled. At the same, the vertical cover
serves wind protection.
BEEM GmbH, Abteilung Kundendienst, Dieselstraße 19-21,
61191 Rosbach v.d.H., Germany
Phone +49 (0)1805-233600, Fax +49 (0)1805-233699
(14 ct/min from a German land line. Maximum mobile phone price 42 ct/min.
Other countries: price depending on tariff.)
Email: [email protected], Internet: www.beem.de
Operation and use
Put the drip tray into the housing and
fi
ll with water up
to the MAX mark.
Hang the heating elements into the holes on each
side of the drip tray. The thermostat
fi
ts into the
recess in the drip tray.
Put the grill plate onto the drip tray while making sure
that the drain points towards the thermostat and allow
it to snap in. You can also hang the grill grate into the 4
holes in the drip tray.
Preheat the grill until the required temperature has
been reached and the indicator lamp extinguishes.
NOTE
►
When using for the
fi
rst time, it is possible that
production-related additives such as grease could
cause slight odour or smoke. This is completely
normal. Ensure suf
fi
cient ventilation.
Never operate the heating element in a dismantled condition.
Do not use charcoal or
fl
ammable liquids for operating the appliance.
Never operate the appliance without liquid in the drip tray otherwise the
appliance may overheat, particularly when the cover is
fi
tted. It is also
possible that fat burned onto the dry tub may cause heavy smoke.
