23
EN
Air Joy Hot & Cool
BEEM - Elements of Lifestyle
NOTE
The appliance continues to run
►
for roughly 10 seconds after
switching off.
Wait until the appliance has
►
come to a complete standstill
before switching off at the main
switch and pulling the mains
plug out.
Setting the cold airflow
Continuous setting of the cold airflow
takes place via the regulator
button on
the control panel (5). It is only possible to
regulate the cold airflow.
Switch on the appliance and the cold
airflow as described above.
Turn the regulator
clockwise to
increase the airflow. The stronger the
cold airflow is set, the more bars light
up blue on the control panel (5):
Setting the cold
airflow
Display
low airflow
1 blue bar
medium airflow
2 blue bars
maximum airflow
3 blue bars
Turn the regulator
anticlockwise
to lower the airflow.
Warm airflow
Warm airflow
CANNOT
be set.
Only maximum hot air is produced and
blown out.
The 3 bars on the control panel light up
red
ALWAYS
.
NOTE
The appliance is protected against
►
overheating. This switches off the
appliance to prevent overheating
(see section
Safety equipment,
page21
).
Switching the rotation movement
on/off
(see images A1 and A2)
The rotating movement is switched
on via the
button on the control
panel (5).
Press the
button again to switch
off the rotating movement.
Directing the airflow
(see images B1 and B2)
The direction of the airflow is set via the
inclination adjustment on the foot
(3).
NOTE
Direct the airflow only when the ap
-
►
pliance is switched off.
Hold the foot tight with one hand.
Change the inclination of the appli-
ance with the other hand until the
desired airflow angle has been set
(images B1 and B2).
Содержание Air Joy Hot & Cool
