Beef Eater DISCOVERY 1100 Скачать руководство пользователя страница 17

Страница: 17 / 24

LOCATING YOUR BARBECUE

LOCATING YOUR BARBECUE

Most importantly, this is an outdoor appliance. Ensure your

barbecue is positioned safely away from anything that can

catch fire.

Outdoor Use Only

Under no circumstances is this barbecue to be used indoors.

This includes garages or any other enclosed area. Clearance

from Combustibles: Ensure your barbecue remains at

a distance of at least 45 cm (18”) from any combustible

material such as wood, gyprock, paper and plants. Do not

store combustible materials, gasoline or flammable liquids

or vapours within 45 cm (18”) of the barbecue.

Adequate Ventilation

Ensure there is adequate ventilation for both the barbecue

and cylinder. This is required not only for proper combustion,

but also to prevent gas build up. 20mm ventilation and

air-intake gap is to be left at rear of the barbecue in

fixed installations.

Firm Level Surface

Use your barbecue only on a firm level surface.

This barbecue is not designed for recreational vehicles, and

shall not be installed on a boat or any marine craft.
Protection From Weather: Keep the barbecue protected from

adverse weather, including rain and high winds. Polyvinyl

covers are available that have been specially designed for

this range of barbecues. Allow clear access to the entire gas

supply hose and regulator.
Maintenance Access: When your barbecue is installed, you

should be able to access the gas supply line including the

gas piping or hose, gas regulator, gas cylinder and any shut

off valves.
Partial Enclosures: Many backyards have areas that are

partially closed off, such as balconies and pergolas. In some

cases, it is hard to decide whether these partially enclosed

areas should be classified as indoor areas. .

Connect the regulator to the gas cylinder

WARNING

WARNING

Verify ‘Gas Type’ label & data plate attached to side of

barbecue is correct for the gas you are about to connect to.
The hose and regulator is connected to the BBQ and leak

tested at factory. Do not disassemble unnecessarily.
1. Make sure burner valves are in the ‘Off’ position.
2. Screw regulator side to the cylinder, and hand-tighten.

The connected gas cylinder is to be mounted external to the

barbecue using the mounting hook supplied.
Do not store the connected gas cylinder in the compartment.
Do not store spare gas cylinder/s in the compartment or near

the appliance: use only the cylinder storage facility provided.

If this warning is not followed, a fire causing injury or damage

may occur.
In North America, the installation must confirm with local

codes or, in the absence of local codes, with either the

National Fuel Gas Code, ANSI Z223. 1/NFPA 54, Natural

Gas and Propane Installation Code, CSA B149.1, or Propane

Storage and Handling Code, B149.2
NOTE:
• If moving the BBQ from one place to another, never drag

the cylinder behind. Disconnect the cylinder first, move,

and re-connect once reached the new location.

• For storage and cylinder exchange, disconnect hose

at the cylinder only, do not disconnect hose from

the appliance.