bee M1, Руководство пользователя

Страница: 9 / 35

9
„ Make sure the battery has been installed before charging. It is
best not to remove the battery while charging.
„ Upon completion of charging, disconnect the charger from your
phone and the power supply.
If you have not disconnected the charger from your phone and the
power supply, the charger will continue to charge the battery after about
5 to 8 hours when the batter level decreases substantially. We advise
you not to do like this, as it lowers your phone performance and
shortens your phone life.
Notices when using your charger
„ Please use AC 220 volts. The use of any other voltage will
cause battery leakage, fire and cause damage to the mobile
phone and charger.
„
It is forbidden to short circuit the charger, as this will cause
electrical shock, smoking and damage to the charger.
„ Please do no use the charger if the power cord is damaged,
as this will cause fire or electrical shock.
„ Please immediately clean any dust gathered on the electrical
outlet.
„ Please do no place vessels with water near the charger in
order to avoid water splashing onto the charger and causing
an electrical shortage, leakage or other malfunction.
„ If the charger comes in contact with water or other liquid the
power must immediately be switched off to avoid an
electrical short or shock, fire or malfunction of the charger.