
5
3
3
Attach the Base Struts
You will need:
Parts as assembled in Step 2 (base attached to bottom pole)
2 x Base Struts (part 3)
2 x Bolts, Nuts & Washers B (M8 x 20mm)
1 x Bolt, Nut & Washers C (M8 x 65mm) - and plastic bolt cap
Attach one end of each of the Base Struts (part 3) to the base itself using Bolts B (one for each side).
Find the hole toward the top of the Bottom Pole.
Fix two ends of the Base Struts (parts 3) either side of the Bottom Pole using the single Bolt C (M8 x 65mm) and
complete using the plastic bolt cap.
Join Middle and Bottom Poles
You will need:
Pre-assembled parts from Step 1 (ring + bac top pole)
Pre-assembled parts from Step 2 & 3 (base + bottom pole + base struts) Part 6 (Middle Pole)
1 x Bolt, Nut & Washers D (M8 x 60mm)
Join the Middle Pole (part 6) to the Bottom Pole in the pre-assembled base using one Bolt, Nut & Washers D.
4
4