BEDU V MODULAR Series Скачать руководство пользователя страница 14

 

 

 

 

Pag. 14/32

                                                     

    

   

 

 

 

 

 

“Instructions for a proper use reasonably foreseeable”. 

Bedu

 

disclaims any liability damages to things and people related to uses for which the 

pump was not specifically designed and constructed. 

 

 
 
 

Also the ways in which certain situations of danger might present as a result of improper use, are prohibited. 

RESIDUAL RISKS AND PROTECTION MEASURES TO BE TAKEN 

Description of the residual risks that remain 

Despite adopted measures incorporated in the pump, the main dangers associated with the use of the pump and 
the solutions identified are the followings: 
Danger of sketches projection of process fluid that can be corrosive or burning, as a result of improper 

installation and sudden ruptures of the pump casing and hydraulic lines; 
Danger of cuts to the hands due to the presence of smears on the pump casing; 

Explosion of the pump is due to a formation of explosive mixture inside the pump casing as a result of an 
improper use. 
 

 
 

Protection measures to be taken by the user and instructions 

 

PROHIBITION 

It is absolutely forbidden to the user to tamper with safety devices.

 Before using 

the  pump  check  the  proper  couplings  mechanical  protection.  Any  tampering  nullifies  the 
warranty and liability of 

Bedu

 

towards the pump users.

 

 

 

 

Only maintenance personnel can perform maintenance operation affecting safety devices. 

Personal protective equipment to wear 

Protection  measures  that  have  to  be  taken  during  this  phase  are  adopting  antacid  and  antistatic  coverall, 

chemical-resistant glasses, gloves to protect from mechanical and chemical agents and safety shoes. 
Avoid the use of accessories (necklaces, bracelets, etc.) and clothes unshackled; torn or dangling that could get 

entangled in parts of the structure. 

 

OPERATIONAL  LIMITS,  DESCRIPTION    OF  HAZARDS  NOT  EXCLUDED  FROM  THE 
SECURITY MEASURES TAKEN 

Dangers  that  have  not  been  reduced/  eliminated  with  the  security  measures  adopted  on  the  pump  can  be 

reduced/eliminated if operators apply measures on management as a result of having to: 

 

Keep  all  the  safety  warnings  of  and  all  plaques  and  labels  intact  and  replace  them  when  necessary, 
periodically checking their good condition; 

 

Don’t  employ  substances  which  may  affect  the  physical  ability  or  the  mental  faculty  (alcoholic 
beverages, medicines, drugs, etc); 

 

Don’t use without permission spare parts not identical to the originals or components not approved by 

Bedu Pompen BV

 

Don’t perform any modification or structural intervention without the approval of 

Bedu Pompen BV

 

After shocks accidentally suffered by the pump, check the pump integrity and perform a check to 

 

 

Bedu Pompen BV

 

After  a  long  period  of  pump  detention  check  the  pump  integrity  and  functionality  of  stakeholders  to 
wear. If necessary perform the replacement with identical spare parts to the originals. 

 

CAUTION 

Each of the misuse or negligence listed here causes: 

 

immediate cancellation of 

Bedu

 

assistance.

 

 

cancellation of 

Bedu

 

 

responsibility for damage to property, animals or people

 

 

 

 

www.bedu.nl 

Содержание V MODULAR Series





























Отзывы: